Package
| Archive | SM2320 YMTC TAS – MPTool W0613A – FW 1004A.7z |
|---|---|
| Type | Mass production tool package |
| Controller | SM2320 |
| NAND target | YMTC TAS |
| Contents | 48 files, 9.2 MB unpacked |
Component versions
| Component | Version | Date (decoded) |
|---|---|---|
| MPTool | W0613A | 2023-06-13 |
| Firmware | 1004A | |
| DB | W0616 | 2023-06-16 |
| Package (System.ini) | PKG | |
| MPTool file version | 23, 6, 13, 1 |
Dates are decoded from SMI version codes: the letter is the year (J = 2010 … Y = 2025) and the four digits are month and day.
Controller
SM2320: USB 3.2 Gen 2×2 single-chip portable SSD controller.
Function
Silicon Motion mass production tool package. It initializes the drive, loads the controller firmware, scans and records bad blocks, and writes the drive identity (model, serial number, capacity). Packages that include RDT firmware can run a burn-in test before the final firmware is loaded. Running the tool re-initializes the drive; existing user data is lost.
Configuration profiles (6)
| Profile | Selected flash | Capacity setting | RDT |
|---|---|---|---|
| TAS_2DIE_Default.ini | YMTC,1Tbit,YMN09TC1B1JC6C(TAS)(2Die)(SM2320XT) | Auto | no |
| TAS_2DIE_DoRDT.ini | YMTC,1Tbit,YMN09TC1B1JC6C(TAS)(2Die)(SM2320XT) | Auto | yes |
| TAS_2DIE_ISP.ini | YMTC,1Tbit,YMN09TC1B1JC6C(TAS)(2Die)(SM2320XT) | Auto | no |
| TAS_Default.ini | YMTC,1Tbit,YMN09TC1B1DC6C(TAS)(SM2320XT) | Auto | no |
| TAS_DoRDT.ini | YMTC,1Tbit,YMN09TC1B1DC6C(TAS)(SM2320XT) | Auto | yes |
| TAS_ISP.ini | YMTC,1Tbit,YMN09TC1B1DC6C(TAS)(SM2320XT) | Auto | no |
Package contents
| Path | Description | Size |
|---|---|---|
| Config\ | Production configuration profiles | 6 files, 15.9 KB |
| DriveSetting\ | Drive setting tables | 1 file, 3.8 KB |
| EzTool\ | Diagnostic utility (EasyTools) | 9 files, 1.0 MB |
| File For Linux Tool\ | Files for the Linux MP tool | 8 files, 2.2 MB |
| Firmware\ | Firmware images | 10 files, 1.9 MB |
| FlashDB\ | NAND parameter database | 2 files, 3.8 KB |
| Log File\ | Log output folder | empty |
| LSTool\ | LightSwitch editing tool | 2 files, 1.1 MB |
| Module\ | Tool modules | 7 files, 1.5 MB |
| RDT File\ | RDT (burn-in) results | empty |
| SWPretestDll\ | Pretest library | empty |
| Tables\ | Seed, strong-page and I2C tables | empty |
| TestResult\ | Test results folder | empty |
| ISPNum.INI | Settings | 443 B |
| SM2320MPTool.exe | Executable | 1.4 MB |
| System.ini | MPTool system settings | 1.5 KB |
EasyTools functions
[Tab], DialogList=Read Flash ID,Identify Table,Smart Data,SCSI CMD,DBS / DPS,Flash RW,Flash Diagnosis,LBA Info,RS232,Card Info,Mark Bad Info
Flash database (2 entries)
The database lists every part the MPTool can identify. The firmware in this package is built for YMTC TAS; other entries normally need the matching firmware build.
Part numbers are copied as written in the database. Variant lists the bracketed qualifiers from the entry (voltage, die count, generation). Flash ID shows the first six ID bytes stored for the entry.
Flash database W0616 · 2 entries
Source: FlashDB/Flash.SET · section [SM2320XT-DataBase-W0616]
YMTC (2)
| Part number | Variant | Density | Flash ID |
|---|---|---|---|
| YMN09TC1B1DC6C | TAS | 1Tbit | 9B C4 28 49 20 00 |
| YMN09TC1B1JC6C | TAS, 2Die | 1Tbit | 9B C5 29 49 20 00 |
Information on this page was read from the package files.