Silicon Motion mass production tool package. It initializes the drive, loads the controller firmware, scans and records bad blocks, and writes the drive identity (model, serial number, capacity). Packages that include RDT firmware can run a burn-in test before the final firmware is loaded. Running the tool re-initializes the drive; existing user data is lost.
Configuration profiles (1)
Profile
Selected flash
Capacity setting
RDT
Default.ini
Hynix,1Tbit,H25BFT8B3B8R(V6)(2CE)(SM2263XT)
Auto
no
Package contents
Path
Description
Size
Config\
Production configuration profiles
2 files, 21.6 KB
DriveSetting\
Drive setting tables
1 file, 2.0 KB
EzTool\
Diagnostic utility (EasyTools)
16 files, 5.3 MB
File For Linux Tool\
Files for the Linux MP tool
1 file, 2.0 KB
Firmware\
Firmware images
12 files, 4.0 MB
FlashDB\
NAND parameter database
1 file, 38.7 KB
LightSwitch\
LightSwitch firmware parameter tables
13 files, 63.6 KB
Log File\
Log output folder
empty
Log File_ATP\
Log output folder
empty
RDT File\
RDT (burn-in) results
empty
SWPretestDll\
Pretest library
1 file, 635.0 KB
Tables\
Seed, strong-page and I2C tables
4 files, 10.0 KB
TestResult\
Test results folder
empty
name.txt
Package version list
302 B
SM2260XTDLL.dll
Library
426.0 KB
SM2263XT_MPTool.exe
Executable
5.8 MB
System.ini
MPTool system settings
582 B
EasyTools functions
Read Flash ID, ID Table Controller, ID Table Namespace, Smart Data, Flash RW, DBS / DPS, FW Download, HW Rescan, LBA Info, DRAM RW, NVMe CMD, PCIe Info, FA Command, RS232, Event Log, Reset CPU, Card Info, Drawing Vth, Chunk ECC, Erase Count, HMB Info, SSD Info, Power On/Off, Get Log Page, Flash Diagnosis, RSA Key, Lock/Unlock Dev, WRC, Mark Bad Info, Read Telemetry, ScanDev RS232, Debug Log, Disable AutoScan Device, LiteOn ISP, VS Unlock, Leakage Check, Update LS, NVMe USB, PPID Log, CRC Info, CID Option, UART, Ferri Bad Info, Swap Isp, Compare LS
Flash database (108 entries)
The database lists every part the MPTool can identify. The firmware in this package is built for SK Hynix V6; other entries normally need the matching firmware build.
Part numbers are copied as written in the database. Variant lists the bracketed qualifiers from the entry (voltage, die count, generation). Flash ID shows the first six ID bytes stored for the entry.