Mass production (MP) tool package. The tool initializes the drive, loads the controller firmware, scans and records bad blocks, and writes the drive identity (model, serial number, capacity). Packages with RDT firmware can run a burn-in test before the final firmware is written. Running the tool re-initializes the drive; existing user data is lost.
Package contents
Path
Description
Size
Configuration\
Configuration files
15 files, 267.1 KB
FW\
Firmware images
2 files, 79.0 MB
INI_files\
Per-flash settings files
2 files, 9.2 KB
AS_SSD_MP_Tool_V1208.exe
Executable
1.9 MB
param.ini
Tool settings
4.7 KB
Executables
AS_SSD_MP_Tool_V1208.exe
Flash database (3 entries)
Source: param.ini, INI_files/ini_SanDisk(45)/SanDisk_BiCS3_8T_S1_45 3c 98 b3 76 72 0b.INI, INI_files/ini_Toshiba(98)/Toshiba_BiCS3_8T_S1_98 3c 98 b3 76 72 08.INI. Entries from all copies in the package are merged; duplicates are listed once.
SanDisk (2)
Part number
Controller
Flash ID
Settings
param
AS2258
45 3E 98 B3 76 72
TLC_16K 64 GB/CE model “SATA SSD”
BiCS3
AS2258
45 3C 98 B3 76 72
TLC_16K 32 GB/CE model “SATA SSD”
Toshiba (1)
Part number
Controller
Flash ID
Settings
BiCS3
AS2258
98 3C 98 B3 76 72
TLC_16K 32 GB/CE model “SATA SSD”
Information on this page was read from the package files and the archive name.
